There is an aspect of the fairy tale Goldilocks that applies to a fine shower, but you can suffer potentially dangerous burns if the water is too cold or too hot, the perfect balance is to find a moderate enough shower that is comfortable without scalding you, but installing an anti-scald valve can help prevent a hasty jump in temperature while I was in a shower, then showers can still be affected by forces beyond your control, regardless of how carefully you adjust the water temperature.
- Someone flushing the toilet or turning on the dishwasher could suddenly change the water pressure, causing it to become icy cold or fiery hot! Anti-scald valves are plumbing upgrades that protect you from unexpected temperature swings.
Your shower handle must be disassembled in order to install an anti-scald valve! Cut the water supply line at the point where you want to install the up-to-date valve once you’ve accessed the water supply line behind the old valve. Following the manufacturer’s directions, solder the up-to-date valve into site; Before you put the plumbing upgrade back together, turn the gear on the valve to set maximum water temperature. In addition to the risk of burns, there is a hourary danger acquaintanced with moderate flashes in the shower – the hasty change in temperature can make the lady in the shower jump or startle, resulting in a slip-and-fall accident! One more tip for reducing your risk of burns in the shower is to keep the temperature of your moderate water gas furnace set to 120 degrees. Most heating systems go up to 140 degrees, but that is hotter than many people can sit & ends up being a waste of heating energy as well as a burn danger. An anti-scald valve will still come in handy even at maximum un-even temperatures of 120 degrees, & the overall risk of catastrophe will be lower.