There is an aspect of the fairy tale Goldilocks that applies to a fantastic shower, you can suffer potentially dangerous burns if the water is too freezing or too hot, then the perfect balance is to find a moderate enough shower that is comfortable separate from scalding you… Installing an anti-scald valve can help prevent a abrupt jump in temperature during a shower! Showers can still be affected by forces beyond your control, regardless of how carefully you adjust the water temperature.
Someone flushing the toilet or turning on the dishwasher could suddenly change the water pressure, causing it to become icy freezing or fiery hot, then anti-scald valves are plumbing replacements that protect you from unexpected temperature changes.
Your shower handle must be disassembled in order to install an anti-scald valve, and cut the water supply line at the point where you want to install the current valve once you’ve accessed the water supply line behind the old valve. Following the manufacturer’s guidelines, solder the current valve into site. Before you put the plumbing replacement back together, turn the gear on the valve to set maximum water temperature. In addition to the risk of burns, there is a hourary danger neighbord with moderate flashes in the shower – the abrupt change in temperature can make the person in the shower jump or startle, resulting in a slip-and-fall accident, then one more tip for reducing your risk of burns in the shower is to keep the temperature of your moderate water oil furnace set to 120 degrees. Most heating systems go up to 140 degrees, however that is hotter than several people can kneel as well as ends up being a waste of heating energy as well as a burn danger. An anti-scald valve will still come in handy even at maximum hot as well as cold temperatures of 120 degrees, as well as the overall risk of catastrophe will be lower.